Home page About us Products Where we are Contact us

Drilling tools

Tricones Rock bits
PDC bits
Drag bits
Ad claw bits
Dth hammers
Dht bits for DTH hammers
Atlas Copco Hammers
Drive Plates Bits
Eccentric system
Grinders and accessories for button bit regrinding
Line lubricator for DTH hammers
Drilling specialties
Tool joint grease compounds
Geological tools and instruments
Polymers and special products for drilling activities
Mud pumps new & refurbished
Handling tools
Blow out preventors and Diverters
Inflatable packers
Continuous slot wedge-wire screens for water wells
PVC Pipes and Filters
Drifting, Tunneling and Mining Equipment

Custom built

Supply company

Environment division


Drilling tools

 

Line lubricator for DTH hammers

The use of line lubricator is of extreme importance for an optimum operating efficiency of a downhole hammer, since it prevents the main causes of deterioration and premature failure of the hammer.
Made up of a sturdy tank having 8 or 24 litre capacity-30 BAR working pressure - provided with a 2" air inlet assembly from compressor.
Through a Venturi pipe system provided with a regulating valve, dosage of lubrificating oil is made.
The assembly is complete with interception valve, check valve, and coupling for foam inlet with bayonet-joint.

For a correct lubrication, a specific oil for pneumatic tools must be used with 10-30 or 50 SAE grade viscosity, according to drilling and climatic conditions, we suggest the AGIP ASPC-100 rock oil, normally in stock in our warehouse.










MODEL L20-8 MODEL L20-24


Specifications:
- Tank Capacity: 8lt
- Max. working pressure : 30 bar
- Features lubricant: mineral oil with viscosity max 2°E a 50°C
- Consumption max 5 kg / h capacity with about dm3 / s download free
- Working fluid: compressed air
- System: Proportional oil mist lubricator
- Connection in/out UNI-ISO 228 G2"
- 2 portholes viewer over the levels min. and max.
- Testing in accordance with EEC 87/404 VSR
- Weight Kg.22

Specifications:
- Tank Capacity: 24lt
- Max. working pressure : 30 bar
- Features lubricant: mineral oil with viscosity max 2°E a 50°C
- Consumption max 5 kg / h capacity with about dm3 / s download free
- Working fluid: compressed air
- System: Proportional oil mist lubricator
- Connection in/out UNI-ISO 228 G2"
- 2 portholes viewer over the levels min. and max.
- Testing in accordance with EEC 87/404 VSR
- Weight Kg.29



Instruction and assembly manual supplied with assembly.

 

info@adriatech.com

Home page | About us | Products | Where we are | Contact us

 
   

Copyright© Adriatech Europe