Handling tools |
 |
Chain tong - Break-out tong |
|
 This tong is the most versatile tool for employment on drilling rigs and workshops for breaking out and making up any type of joint.
The tong is equipped with a wide jaw, with replaceable inserts, that assure a perfect alignment and a positive grip on any type of joint.
The special chain assures application of high strength.
Range O.D..: From 3  " to 16"
Grip width : 4,38" (111 mm.)
Handle length : 32" (813 mm.)
Weight: 67lbs (30 kg)
Torque: From 11.600 Ft Lbs (15.700 Nm) to 14.300 Ft Lbs (19.370 Nm).
Torque chart available on request.
Other chain tongs for various applications are available on request.
Top 
Rotary tongs |
|
 LF Type
The "LF" Drill pipe and Casing Tong is especially designed for water well, seismographic and mining rigs
With four available head size, the tong can handle the following pipe diameters:
2  " - 3 "
3 " - 5 "
4  " - 6  "
5 " - 7 "
Torque capacity : 16.000 ft. lb (2200 Kgf/m)
Weight: 52 Kg
 Super
C Type
Heavy duty lightweight rotary tong, ideal for water well rigs and
small oilfield rigs.
With 6 sets of different lug jaw assemblies, the tong can handle
a wide pipe size range.
Pipe capacity: from 2 " to 10 "
Torque rating: 35.000 ft.lb
Weight: 115 Kg
Top
Elevators |
|
These elevators are the ideal tools for casing, screen, pump pulling and setting.
They are made of bent sheets of steel, having a rugged rapid pin fastener with safety shield, stranded cable eye to eye wire rope bails.
Light weight (up to 5 Ton capacity)
Sizes available: 1  " - 2 " - 3 " - 4 " - 5" - 5  " - 6  " - 8 " - 10 " - 12 ".
Heavy duty (up to 20 Ton capacity)
Sizes available: 6 " - 8 " - 10 " - 12 " - 14" - 16" - 18" - 20" - 22" - 24".
Custom sizes are satisfied upon request.
"Side-Door" and "Center-latch" elevators are available to handle drill pipes, drill collars and casings, capacity from 50 to 350 tons.
Top
Safety
clamps and slips |
|
Conical clamps
 Conical clamps are made of a rugged bowl equipped with support hangers and slips in special steel complete with lifting handles.
They are used during setting and anchorage of casing pipe, screens and production tubing.
Rugged and light-weighted, they are of great help to your tubing operations avoiding possibile slipping and ovalization of your pipes, and reducing waste of time during maneuvering operations.
Standard sizes & weights
Diam. Nom. (pollici) |
Diam. Tubi Riv. (mm) |
Weight (kg) |
3 " |
88,9 |
28 |
4 " |
114,3 |
40 |
|
5 " |
139,7 |
50 |
|
6 " |
168,3 |
59 |
|
7 " |
193,7 |
70 |
|
8 " |
219 |
80 |
|
10" |
250 |
90 |
|
10 " |
273 |
100 |
|
11 " |
300 |
105 |
|
12 " |
323,4 |
110 |
|
14" |
355,6 |
114 |
|
16" |
406 |
120 |
|
18" |
457,2 |
128 |
|
20" |
508 |
134 |
Clamps and Slips
Available for drill pipe and drill collar of any size
 
Top
|
