Subscribe to our newsletter and get special prices

Catalogo Adriatech:

Custom Built Brochure:

Fishing Tools:



Stabbing Guides



The Stabbing Guides  are tools employed to protect the threads during pipes manouvring.

Made of sturdy Buna-N rubber and inox steel with a quick regulation hinge.

-for Tubings da 1″ a 4 1/2″

-for Casing da 4 1/2″ a 20″



PDC Bits



PDC bits (Polycrystalline Diamond Bits) represent an innovative technology for drilling in oil field, water and mining activities .

The PDC bits are manufactured with a steel or sintered matrix body equipped with diamond polycrystalline cutters, strategically positioned.

The cutters numbers depend on blades number and bit diameter. These bits are strongly wear-resistant and allow great penetration rates and speed (2-3 times more than traditional tricone rock bits) and longer runs (until 10-20 times) due to the fact that they have no moving parts that may be majorly exposed to damage or failure.

A lame “PDC”

A blade bit reinforced with circular plates of synthetic polycrystalline diamond for soft/medium drilling formation, greater cut resistance, increased durability.

– We can also supply used but refurbished PDC bits with residual efficiency of 80/90%.


– We can provide to refurbish Your used PDC bits , with new diamond inserts and matrix body repair at very competitive costs



Premium Drill Pipes



The continuous necessity of deeper waterwells has requested more powerful drilling machines with torque capacity up to 3000 Kg.m. For this reason, it is extremely necessary to employ drill pipes that can withstand very strong torsional stress. Our “Premium” drill pipes present the following features:

  • Tool joint in 38NC D4 steel, precision-machined with automatic lathe;
  • Pipe in N-80;
  • Connection between the tools joint and the pipe made with a special thread followed by circumferential welding;
  • Tool joints are induction heat-treated and phosphatized.

Diam Ø mm.

Lenght. (mm.)

Thickness

Connection

76

1500
2000
3000

6-8

2 3/8 API Reg.

88,9

1500
2000
3000

8

2 3/8 API Reg.
2 7/8 API Reg.
2 3/8 I.F.

114

3000
5000
6000

8-10

3 1/2 API Reg.
2 7/8 I.F.

127

3000
5000
6000

8-10

3 1/2 API Reg.
3 1/2 I.F.

140

3000
5000
6000

8-10

4 1/2 API Reg
4 I.F.

168

3000
5000
6000

10-12

4 1/2 I.F.
4 1/2 API Reg.

178

3000
5000
6000

10-12

4 1/2 I.F.
5 1/2 I.F.



PVC Pipes



The PVC Pipes Casing are a valid alternative to steel casings. There are many advantages in the employment of PVC pipes casing :
-Strong resistance to corrosion specially in presence of hard and brackish waters
-No problem of scaling
-No problems of corrosion due to dispersed current
-Smooth internal surfaces , less pressure loss, more production of water
-Extreme simplicity in the junction of various stand of pipes. Instead of welding or threaded sleeves , the PVC pipes are supplied with extruded female joints and male threads, complete of rubber gasket.
-Lightness of PVC pipes guarantees easy manoeuvre during transportation, handling and installation.

PVC Pipes Casing Screens

High machining precision has enabled to make filters with extensive open area. The window precision machined have width ( slot) from 0.2 to 3 mm. The choice of correct slot are made on the bases of soil particles size . The Open area and the slot will determine the water rate.

Tubi PVC Filtro

Diam.EXT Classe Diam.INT Spessore D.EXT.Bicch. Filet. Lungh. Peso Pres.
60 – 2″   52,0 4,0 65 Gas/Trapezoid. 6-3 1,1 23
75 – 2″½   66,4 4,3 81 Gas/Trapezoid. 6-3 1,6 14
89 – 3″   80,0 4,5 94 Gas/Trapezoid. 6-3 1,8 9
89 – 3″   79,0 5 95 Gas/Trapezoid. 6-3 2 13
114 – 4″   103,4 5,3 120 Gas/Trapezoid. 6-3 2,9 9
125 – 4″½ PN10 113,0 6 131 Trapezoid.6mm 5 3,5 9
140 – 5″ PN8 129,2 5,4 146 Trapezoid.6mm 5 3,2 5
140 – 5″ PN10 126,6 6,7 149 Trapezoid.6mm 5 4,3 9
160 – 6″ PN8 147,6 6,2 168 Trapezoid.6mm 5 4,6 5
160 – 6″ PN10 144,6 7,7 170 Trapezoid.6mm 5 5,7 9
170 PN10 154,8 7,6 180 Trapezoid.6mm 5 5,9 8
180 6″½ PN8 166,8 7,0 188 Trapezoid.6mm 5 5,8 5
180 6″½ PN10 162,8 8,6 191 Trapezoid.6mm 5 7,1 9
200 7″ PN8 184,6 7,7 210 Trapezoid.6mm 5 7,2 5
200 7″ PN10 180,8 9,6 214 Trapezoid.6mm 5 8,8 9
225 8″ PN8 207,6 8,7 236 Trapezoid.12mm 5 9,0 5
225 8″ PN10 203,4 10,8 240 Trapezoid.12mm 5 11,1 9
250 9″ PN8 230,8 9,6 264 Trapezoid.12mm 5 11,5 5
250 9″ PN10 226,2 11,9 268 Trapezoid.12mm 5 13,7 9
280 10″ PN10 253,2 13,4 302 Trapezoid.12mm 5 17,3 9
315 12″ PN8 290,8 12,1 330 Trapezoid.12mm 5 18,0 5
315 12″ PN10 285,0 15,0 333 Trapezoid.12mm 5 21,8 9
400 14″ PN8 369,2 15,4 422 Trapezoid.12mm 5 29,0 5
400 14″ PN10 362,0 19,0 430 Trapezoid.12mm 5 35,3 9

PVC Pipes Piezometric

The geotechnical survey industries represents a factor of considerable importance for determining the condition of site pollution. In the table are specified the sizes and characteristics of Piezometrics commercial pipes:
Are also availlable :

-INOX 304 and 316L Piezometric Pipes
-Micropiezometers
-Single Use Samplers -Bailers
-PVC Well Heads
-PVC Pipe Plugs – padlockable
-Steel Security Sumps -padlockable
-Porous filtering cells
-12V Sampling Submersible pumps

Diam.EXT Diam.INT Spessore D.EXT.Bicch. Filet. Lungh. Peso
21,1-½” 15,9 2,6 26 Gas 6-3 0,2
26,5-¾” 21,3 2,6 30 Gas 6-3 0,3
33,3-1″ 26,7 3,3 40 Gas 6-3 0,5
42,0-1″¼ 34,6 3,7 49 Gas 6-3 0,7
48,0-1″½ 40,0 4,0 55 Gas 6-3 0,8

PVC Pipes Drainage

The use of slotted drainage pipes is required whenever there is excessive water in the ground which makes this less solid and consistent. By placing drainage pipes in the ground in sub-horizontal position, the excess of water is carried out away which favour dissipation of interstitial over-pressure. The fields of application are : trenches, landslide fronts, wells, tunnels, raised roads and railways, port areas and sport fields.
The drainage pipes could be :

-Micro-slotted single pipes (slot from 0.2 to 0.4 in silt/sand and from 0.6 to 0.8 in case of coarse sand or gravel)

-Double wall micro-slotted pipes, in the anulus can be inserted filtering material or siliceous gravel

-Micro-slotted pipes covered by filter fabric

Colonne di mandata per pompe sommerse in PVC

The laying of pipes is realized with M / F squared threaded joints. The hydraulic seal is ensured by a front seal, pre-installed in the female junction. The conical shape of the seal allows to absorb the torsional vibrations of the submerged pump, which could cause the unscrewing of the column.

The maintenance operations are eased by the o-ring assembled on the male end of the junction. This kind of seal protects the joint from the intrusion of impurities (proliferations of algae or bacteria) that typically tends to deposit on the tubes submerged in wells, causing the obstruction of the threads. Both ends have a thicker wall in order to obtain a male thread without altering the compressive and tensile strength.

The connection of the riser column to the pump and the well head are realized through adapters made of micro-molted stainless steel AISI 304 .

Main Advantages

Long useful life: The PVC is not affected by corrosion or electrolysis caused by salt water.

High resistance: Molecular orientation increases the resistance rate of 60% in comparison to a regular PVC pipe.

Savings in cost of installation: The system is fast, easy to handle and install.

High performance: Low pressure drop, 30% less than pipes of galvanized steel.

It doesn’t require the use of seals and/or screws for the assembly.

Aluminium inclinometric pipes

The aluminium pipe has the purpose to act as a “guide” pipe for the proble inclinometer.

The aluminium inclinometric pipes are male/male coupled by means of a riveted pipe coupling.

  Diametro est.mm Diametro int.mm Diametro est.  Diametro int.  Spess Lungh Peso gr/m
  53 49 58 54 2 3000 916
manicotto 57.6 54 62.6 59.2 1.7 300 851
  80 76 87 83 2 3000 1496
manicotto 85 80.5 92 85 2.25 300 1620

Casagrande type cells

The casagrande piezometer is used to check the groundwater level. It is an instrument made up of filter material and two tubes. The longer tube allows the cell to be washed or purged using a flow of water. The water enters the porous filter and reaches a certain level in the shorter tube. The water level in the tube allows you to know the level of the water table.

Injection pipes with valves

Diametro
Fori interni disponibili
2″
1″
 
 
 
 
 
 
2″½
1″
1″¼
 
 
 
 
 
3″
1″
1″¼
1″½
 
 
 
 
4″
1″
1″¼
1″½
2″
 
 
 
125
1″
1″¼
1″½
2″
 
 
 
140
1″
1″¼
1″½
2″
 
 
 
160
1″
1″¼
1″½
2″
2″½
3″
 
170
1″
1″¼
1″½
2″
2″½
3″
 
180
1″
1″¼
1″½
2″
2″½
3″
4″
200
1″
1″¼
1″½
2″
2″½
3″
4″
225
1″
1″¼
1″½
2″
2″½
3″
4″
250
1″
1″¼
1″½
2″
2″½
3″
4″
280
 
 
 
2″
2″½
3″
4″
315
 
 
 
2″
2″½
3″
4″


Valved Injection Pipe



Rigid PVC pipe for consolidation injection and waterproofing, reinforcing unstable foundations, building dams, tunnels and anchoring tie-rods.
Possibility of varying the distance of the “valve pitch” rubber valves.
Fitting of valves in thickness or using valve-retention outer rings.
  Serie Normale Serie Rinforzata
Diam.EXT mm 34 38 40 48 48 60 38 40 48
Diam.INT mm 27 32 34 42 40 52 27 31 34


Drill Collars



Drill collars are heavy drill string members used as weight thus forcing the bit to penetrate the formation being drilled. The collars are made from selected bars of chromium molybdenum alloy steel AISI 4145 H bored by trepanning to ensure close tolerance of bore alignment. All drill collars are full length heat trated to obtain the best physical properties and to provide a combination of hardness strength and ductility.

Dimension

Diam. ext. (mm.)

Diam. Int. (mm.)

Weight Kg./m.

4

101

45

51

4 1/2

114

45

68

5

127

50

82

6

152

71

113

6 1/2

165

71

137

7

178

71

163

8

203

71

223

8 1/2

216

71

250

9

225

71

290



Continuous slot wedge-wire screens



Dal DN100 al DN600

Screens are produced wrapping in continuous wire, with triangular shape, on round directress.Every intersection is resistance welding (RW).

Going through all the various combination of wire’s section,number of directress and step is possible to produce screens for many different application fitting perfectly every project.

Features

V-wire screens are characterized by a large filtering surface that gives very high performance in passage of water even in presence of low speed water.

This allows to optimize the well production:

-Minimun hydraulic resistance

-Reduced encrustation

-Less impurity (sand) that might damage the pump

-Fast and complete perforation fluid removal

Material

The product is made in high quality Stainless Steel to resist to pressure and stresses during installation or to corrosion

Dimensions and Standards specifications

From DN100 to DN600

n.3 levels of collapse pressure resistance

Configurable slot opening in base of the sand analysis

Stainless steel standard grade AISI 304L 1.4301 or AISI 316L 1.4404

Joins:welded threaded M/F (metric trapezoidal or type API)

DN

Diam. est. a saldare

Diam. est M/F

Diam. Int Min.

Peso Kg/mt.2

3 1/2

88,9

114,3

77

7,8

4 1/2

114,3

127

96,3

9,5

5 1/2

139,7

152,4

121,7

11

6 5/8

168,3

181

150,3

13,5

7 5/8

193,7

203

175,7

15

8

210

220

192

16

8 5/8

219

230

201

17,5

10

250

264

232

18,5

10 3/4

273

282

255

22

11 3/8

300

314

282

23,5

12 3/4

323,4

340

305

24

14

355,6

370

337,6

27

16

406

425

388

32

TO ORDER SPECIFY:

  1. O.D.
  2. SLOT
  3. Length required
  4. Connection (buttweld or M/F couplings)


Diverters



ROTATING DIVERTER SERIES 2000

The Diverter series 2000 is a low profile Rotating Control Head designed for Top-Drive rigs. The frictional enagement between the drill string and stripper rubber rotates the control head with the drill string sealing off the well bore contrinuously while diverting all cuttings and debris. The unit is designed to be used with our Part # 2010 stripper rubber and can seal off from 2″ to 5″ drill steel.

BOWL SIZE

FLANGE

OVERALL HEIGHT

BODY BORE

SLEEVE BORE

7 “

6″-900

26″

7 1/16″

5 5/8″

8″

8″-400

25 3/4″

8″

5 5/8″

11″

10″-400

23 1/2″

11 1/8″

5 5/8″

11″

10″-900

23 3/4″

11 1/8″

5 5/8″

14″

12″-900

22″

14″

5 5/8″

NON-ROTATING DIVERTER

Non rotating Diverter is ideal for use on TopDrive rigs where drill pipe is to be rotated inside stripper.
It safely diverts all drill cuttings away from the rig and personnel.

BOWL SIZE

FLANGE

OVERALL HEIGHT

BODY BORE

7 1/16″

6″-900

17 3/4″

7 1/16″

8″

8″-400

17 1/2″

8″

11″

10″-400

17 1/2″

11 1/8″

11″

10″-900

15 1/2″

11 1/8″

13″

UNI DN300 PN16

15 3/4″ (400mm)

12 1/2″ 318mm

The Diverter can be manufactured with any desired inlet or outlet flange. Used with #4010 rubbers, it will handle from 2″ to 8″ drill pipe. .



DIvertech



Pneumatic system for diversion of drill cuttings

The “DIVERTECH” is a compact, easy to install accessory for any kind of drill rig. The patented “Flow – thru – boot” expands (10 psi) from the “DIVERTECH” spool to form a seal against the ground or rock face allowing cuttings to be diverted through a flow line, with or without casing in the borehole.
“DIVERTECH” offers the following advantages:

  • Dust and rock chip control
  • Safety of rig operations
  • Improved bit life and penetration rate
  • Easy and safe sampling of drill cuttings
  • Drill cuttings can be immediately deposited in an appropriate container for faster and total disposal.

SIZES
O.D. 24″ – Bore 12 “
Overall retracted 24″ – Overall inflated 36″

Contact our offices for further details



Preventer



Drilling deeper holes requires the use of safety equipment that will seal off the well bore in caso of blow out of gas.

The “PREVENTECH” is designed to hold a down hole pressure of 1500/3000 psi.

The unit is operated by a nitrogen accumulator.Max hydraulic input pressure: 1500/2000 psi.

Several styles of rotating,non-rotating,ram,anular BOP system are available upon request.

Note:For more information please ask for product sheets.




Adriatech progettazione ingegneristica controllo di qualità

Get in touch 

Location 

  • Adriatech srl
  • Via Prati 39
  • 65124 Pescara-(PE)
  • Italy

Tutti i loghi e marchi in questo sito sono di proprietà dei rispettivi proprietari. Tutto il resto del materiale è Copyright© 2026 Adriatech. E' vietata la riproduzione anche parziale o l'uso commerciale di quanto riprodotto sul sito Adriatech.

Other trademarks shown on this website belong to their owners. All other materials and descriptions are Adriatech Copyright© 2026.Reproduction or commercial use by other companies, even only partial, is expressly prohibited.


© 2020 Adriatech s.r.l.