Subscribe to our newsletter and get special prices

Catalogo Adriatech:

Custom Built Brochure:

Fishing Tools:



Claw Bits



These tools are ideal for drilling through chert, gravel, shale and generally in all formations averagely consolidated.

The pilot bit is threaded to the body; the bits, assembled on bit holders in an increasing quantity depending on the diameter, are easily replaced when totally worne out.



Water well piston swabs



The piston with special rubber seals connected to the rods is moved inside the well producing an increase and decrease in pressure.The tool on the bottom has a valve that allows the passage of the water present inside the well allowing cleaning through the pressure variation produced.



Casing Puller



Hydraulic casing puller is special equipment for pulling out casings inside the holes. It’s suitable for cast-in-place pile construction, jet grouting drilling, small diameter drilling into large diameter concrete piles and casing drilling constructions.



Pumping Head Adduction Head





PVC Surging Block



Surge blocks are designed to develop gravel packed wells by gently forcing water to flow through the screen. The in and out action helps provide for maximum water flow into the well by settling and setting the gravel pack.



Shale Shaker



Junior Standard Shaker
The Junior Standard Shaker is perfect for any small drilling operation. Constructed on a skid , each unit is equipped with explosion proof 3 HP motor (50 or 60 Hz – 3 phase) , powering the higher performance vibrating assembly.Screens size 3Ftx3Ft
-Screens avaiable from 10 to 60 Mesh.
-Max Rate of 1000-1200 Lit/min with Screen 10-20 Mesh.

-Dimensions: cm 127 x 110 x 90h – Weight: 420 Kg.

Standard Shaker

Similar to Junior Shale Shaker but of bigger dimensions. Screens size 4ft x 5ft type HookStrip – Total area 20 sqft ,orbital vibrating system powered by a 5 HP Explosion-Proof Motor ( 3phase – 50hz/60Hz ) complete of starter .
-Screens avaible from 20 to 80 Mesh.
-Maximum rate of 2800 lit/min with screens 10 Mesh , 1200 lit/min with screens 30/40 Mesh.

-Dimensions: cm 208 x 150 x 90h – Weight: 840 Kg.

Tandem Shaker


The Tandem shaker is driller proven to yield optimum results when fine mesh screens are required with a dense solids concentration and high mud volume.A common sense approach to “screening”,includes a unique “Flowback” pan to transfer mud from beneath the primary screen to the head of the secondary screen giving maximum screening surface of the finer mesh screen for final separation.
This, is conjuction with an orbital oscillating vibrator positioned at the center of gravity of the horizontal mounted screen frame,produces the optimum in screening results.
-Double bridge with 2 screens 4ft x 5ft
-Primary screen 10-20 Mesh , Secondary 60/80/100 Mesh
-Orbital vibrating system powered by a 5 HP Explosion-Proof Motor (3phase-50hz-230/460Volt)

-Dimensions: cm 210 x 150 x 110h – Weight: 1270 Kg

FS-300 ThunderBird – Linear Motion Shale Shaker

The FS300 is a high-G force linear motion machine designed for maximum flow of drill fluids.
FS300 utilizes the wedge system for quick screen changing.

– Power packed with 7.7G Forces

– Improved Wedge Lock Design

– Extra Heavy Duty Frame & Pan

– Martin or Vimarc vibrator Motors

– Heavy Duty Rubber Loop Isolators

– 3 Pretensioned screen pannels
– Deck Angle -2 to +6 degrees variable.
– Dimensions: cm 310 x 200 x 150h – Weight: 2480 Kg



Mud Hoppers



MUD HOPPER – MUD MIXER

MUD HOPPER

A complete assembly, easy and efficient, that allows a perfect preparation of drilling mud with polymers or bentonite. The products to mix are intaken, into the hopper, by the vacuum effect created by a Venturi element in the downstream line. Turbolence provides a rapid and uniform dispersion.
It is advisable to circulate with pump for a few minutes in order to stabilize drilling mud concentration.
The mud hopper is mounted on a sturdy skid to allow for easy transportation and rig installation

SIZES: 1150 X 450 X 870 H (mm.)

TECHNICAL DATA
Mud Hopper Model 3″ 4″ 6″
Pressure 2-3,5 BAR 2-3,5 BAR 2-3,5 BAR
Mud Volume circa 200-300 lit/min circa 400-520 lit/min circa 4000-5300 lit/min
Solids circa 15-20 Kg/min circa 45 Kg/min circa 270 Kg/min
Choke Nipple Noze 1/2″ 3/4″ 2″



Mud Guns



Mud guns are mounted inside the tank for perfect mixing and suspension of solids.


-Powered with centrifugal pump



Mud Mixer



DATI TECNICI: – Tank Capacity m3 1,2 – Hourly production m3 12 – Mixing time min. 5 – Pump delivery L/min. 2.500

AVAILABLE WITH: – Electric engine HP15 220/380 V – 50 Hz – diesel engine HP 20 2000 RPM

DIMENSIONS: – Width 1.900 mm. – Lenght 1.800 mm. – Height 1.400 mm. – Weight 800 Kg. (1.100 Kg. diesel)



Mud Agitators



-Mud agitators are designed to increase performance of solids removal equipment , maintain uniform drilling mud density , to prevent solids setting. Each assembly is compact , and is powered by explosion-proof electrical motor.




Adriatech progettazione ingegneristica controllo di qualità

Get in touch 

Location 

  • Adriatech srl
  • Via Prati 39
  • 65124 Pescara-(PE)
  • Italy

Tutti i loghi e marchi in questo sito sono di proprietà dei rispettivi proprietari. Tutto il resto del materiale è Copyright© 2026 Adriatech. E' vietata la riproduzione anche parziale o l'uso commerciale di quanto riprodotto sul sito Adriatech.

Other trademarks shown on this website belong to their owners. All other materials and descriptions are Adriatech Copyright© 2026.Reproduction or commercial use by other companies, even only partial, is expressly prohibited.


© 2020 Adriatech s.r.l.