Newsletter
Iscriviti alla nostra newsletter per ricevere offerte promozionali e informazioni da Adriatech

Catalogo Adriatech:

Custom Built Brochure:

Fishing Tools:


Handling Tools



These elevators are the ideal tools for casing, screen, pump pulling and setting.They are made of bent sheets of steel, having a rugged rapid pin fastener with safety shield, stranded cable eye to eye wire rope bails. Light weight (from 5 to 10 Ton capacity) 1 “ – 2 “ – 3 “ – 4 […]



– Fast and safe way to install bell end well casing– Lightweight elevators constructed of formed and welded 1/4″ steel– 1/2″ lock pin and hinges– All elevators are equipped with zinc plated, high test, grade 43 chain– 1/4″ chain (2000 lbs. test) is on 1″ through 6″ elevators– 5/16″ chain (3000 lbs. test) is on […]



Conical Clamps Conical clamps are made of a rugged bowl equipped with support hangers and slips in special steel complete with lifting handles. They are used during setting and anchorage of casing pipe, screens and production tubing. Rugged and light-weighted, they are of great help to your tubing operations avoiding possibile slipping and ovalization of […]



– Developed for the environmental industry to hold flush joint pipe safely– Constructed of formed and welded 1/4″ steel– Equipped with two holding tabs for lifting– Light weight and easy to handle– One tee bolt tensioner used to apply pressure around pipe with cupped set screws for gripping Diametri 4″ 12″ 4 1/2″ 14″ 5″ […]



LF Type The “LF” Drill pipe and Casing Tong is especially designed for water well, seismographic and mining rigsWith four available head size, the tong can handle the following pipe diameters: 2 3/8“ – 3 1/2“ 3 1/2“ – 5 3/8“ 4 3/4“ – 6 1/4“ 5 3/4“ – 7 1/4“ Torque capacity : 16.000 ft. […]





Fast Klamp is a manual tool made to hold the riser columns on the wells during installation or maintenance of submersible pump.By using the interchangeable jaws it is possible to tighten and to hold pipes in steel or plastic material in the following diameters: 1″ – 1 1/4″ – 1 1/2″ – 2″ – 2 […]



The Kwik Klamp is the most popular tool used worldwide by well drillers, pump installers, well servicemen, and environmental drillers.The Kwik Klamp allows workers to bring pipe up to an easy working level. KK1-Kwik Klamp 1 for pipe sizes 1″ – 2″ KK2-Kwik Klamp 2 for pipe sizes 2 1/2″ – 4″ The Kwik Klamp […]



The Casing Lifter is a completely mechanical device employed to lift flush joint casing from the internal. It has an internal spring which forces the slips to the casing wall when the hook located under and to the side of the main bail is unlatched. Likewise, when the hook is manually latched to the small […]



The Stabbing Guides  are tools employed to protect the threads during pipes manouvring. Made of sturdy Buna-N rubber and inox steel with a quick regulation hinge. -for Tubings da 1″ a 4 1/2″ -for Casing da 4 1/2″ a 20″



Hydraulic casing puller is special equipment for pulling out casings inside the holes. It’s suitable for cast-in-place pile construction, jet grouting drilling, small diameter drilling into large diameter concrete piles and casing drilling constructions.



Rotating and non-Rotating To engage the lifting winch line to the string rotating on thrust bearing or on bushing lifting capacity up to 25 tons





Adriatech progettazione ingegneristica controllo di qualità

Get in touch 

Location 

  • Adriatech srl
  • Via Prati 39
  • 65124 Pescara-(PE)
  • Italy

Tutti i loghi e marchi in questo sito sono di proprietà dei rispettivi proprietari. Tutto il resto del materiale è Copyright© 2022 Adriatech. E' vietata la riproduzione anche parziale o l'uso commerciale di quanto riprodotto sul sito Adriatech.

Other trademarks shown on this website belong to their owners. All other materials and descriptions are Adriatech Copyright© 2022.Reproduction or commercial use by other companies, even only partial, is expressly prohibited.


© 2020 Adriatech s.r.l.