The Air Lift pumping system is a pump that has low suction and moderate discharge of liquid and entrained solids. The pump injects compressed air at the bottom of the discharge pipe which is immersed in the liquid. The compressed air mixes with the liquid causing the air-water mixture to be less dense than the rest of the liquid around it and therefore is displaced upwards through the discharge pipe by the surrounding liquid of higher density. Solids may be entrained in the flow and if small enough to fit through the pipe, will be discharged with the rest of the flow at a shallower depth or above the surface.
Bailers
Flat Valve Bailers are used to remove cuttings from the hole. When the bailer is lowered into the hole the Flat valve opens to permit the intake of water and cuttings. The bailer is then surfaced and set down to release the contents.
Casing Scraper
The Casing Scraper incorporates blades assembly and is used to remove scale and debris from the internal surface of a casing string. Generally run on tubing or drill pipe, casing scrapers are routinely used during workover operations to ensure that the wellbore is clean before reinstalling the completion string.
Casing Swage
Casing Swages are an economical method of repairing collapsed casing. The swage can also be used as drift prior to running production tools to ensure no restriction down hole. The swage has a shallow taper on the bottom end to allow for efficient swagging and a taper on the top for easy entry into tight spots on the return trip.
Jetting Tools
The Jetting Tool allows the well walls and screens to be washed with high pressure water spray.
A head with radially positioned nozzles is used, which with action
of water removes encrustations and cleans the walls of the well.
It can be used in conjunction with other types of surgery such as brushing to increase effectiveness.
Water well piston swabs
The piston with special rubber seals connected to the rods is moved inside the well producing an increase and decrease in pressure.The tool on the bottom has a valve that allows the passage of the water present inside the well allowing cleaning through the pressure variation produced.
Pumping Head Adduction Head
PVC Surging Block
Surge blocks are designed to develop gravel packed wells by gently forcing water to flow through the screen. The in and out action helps provide for maximum water flow into the well by settling and setting the gravel pack.
Brush Tool
The brushes are composed of radially arranged steel wire bristles and are moved logitudinally.
It is possible to apply a rotation through the connection to the rods.
In this way the encrustations are also brushed in the cracks and the correct functioning of the well is restored as it was originally.It can be used in combination with other types of interventions such as the jetting tool to increase effectiveness.
Horizontal Drilling
Horizontal directional drilling (No-Dig) is a valid environmental method for installing underground pipes and cables, in soil and in rock, from the smallest up to the larger sizes. State-of-the-art, innovative technologies
are today in use, that require making an initial pilot hole, then spread out, even at successive stages, with HOLE OPENER.
Our company specializes in the manufacture of HOLE OPENERS, custom-built according to clients specific operational requirements: no matter what the size or ground formation, the HOLE OPENER will have suitable cutters, milled tooth or tungsten carbide insert types, in the right quantities, to allow for maximum and fastest penetration rates and outstanding performances.
Hole Openers
Tooth Hole Opener diam 240mm for pilot bit 114mm
TCI Hole opener diam 380mm for pilot bit 220mm
Changable cutters for Hole Openers
Hole Opener diam. 20″ for pilot bit 12 1/4 “
Hole Opener 28″ x 12 1/4″ pilot with 5 cones
Hole Opener 28″ x 12 1/4″ pilot 5 cones
AD Fly Cutter
Open body with three arms for effective feeding and cutting
Available with API threads or other connections
Equipped with replaceable TC Teeth / Spikes
Jetting with nozzles positioned front and rear / replaceable nozzles
Integral central body produced in AISI 4140 steel
External surfaces reinforced with tungsten carbide hardfacing
AD Barrel Reamer
Body inclined at 30 ° (front and rear)
Available with API threads or other connections
Equipped with replaceable TC Teeth / Spikes
Jetting with nozzles positioned front and rear / replaceable nozzles
Integral central body produced in AISI 4140 steel
External surfaces reinforced with tungsten carbide hardfacing