The use of line lubricator is of extreme importance for an optimum operating efficiency of a downhole hammer, since it prevents the main causes of deterioration and premature failure of the hammer.
Made up of a sturdy tank having 8 or 24 litre capacity-30 BAR working pressure – provided with a 2″ air inlet assembly from compressor.
Through a Venturi pipe system provided with a regulating valve, dosage of lubrificating oil is made.
The assembly is complete with interception valve, check valve, and coupling for foam inlet with bayonet-joint.
For a correct lubrication, a specific oil for pneumatic tools must be used with 10-30 or 50 SAE grade viscosity, according to drilling and climatic conditions, we suggest the AGIP ASPC-100 rock oil, normally in stock in our warehouse.

Specifications: – Tank Capacity: 8lt – Max. working pressure : 30 bar – Features lubricant: mineral oil with viscosity max 2°E a 50°C – Consumption max 5 kg / h capacity with about dm3 / s download free – Working fluid: compressed air – System: Proportional oil mist lubricator – Connection in/out UNI-ISO 228 G2″ – 2 portholes viewer over the levels min. and max. – Testing in accordance with EEC 87/404 VSR – Weight Kg.22 | Specifications: – Tank Capacity: 24lt – Max. working pressure : 30 bar – Features lubricant: mineral oil with viscosity max 2°E a 50°C – Consumption max 5 kg / h capacity with about dm3 / s download free – Working fluid: compressed air – System: Proportional oil mist lubricator – Connection in/out UNI-ISO 228 G2″ – 2 portholes viewer over the levels min. and max. – Testing in accordance with EEC 87/404 VSR – Weight Kg.29 |
